 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TECHNOLOGIES Product Data Sheet 2 WATTS REGULATED DC/DC CONVERTER TM HL02R q SURFACE MOUNT CONSTRUCTION q TEMPERATURE RANGE: -25C TO +70C FEATURES q LOW COST q INTERNAL FILTERING q LOW OUTPUT NOISE q SHORT CIRCUIT PROTECTION DESCRIPTION The HL02R Series offers an extensive selection of input and output voltage combinations to choose from. These minature, regulated DC/DC converters come in a 24 pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. The HL02R Series utilizes a 110KHz push-pull ORDERING INFORMATION HL02R xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only oscillator in the input stage with low-drop regulators on the outputs reducing the output noise and maintaining good efficiency. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.5W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300C * *Note: Refer to Reflow Profile for SMD Models. TYPICAL PERFORMANCE CURVES Specifications typical at T A = +25C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 100% 50% 0% 0% 25% 50% 75% 100% 3400 E Britannia Dr, Ste 122 HL02RrevD,10/97 l Tucson, Arizona 85706 l Phone: 520.628.8292 l Fax: 520.770.9369 l Internet: http://www.pcc1.com Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL HL02R05S05 HL02R05S12 HL02R05S15 HL02R12S05 HL02R12S12 HL02R12S15 HL02R15S05 HL02R15S12 HL02R15S15 HL02R24S05 HL02R24S12 HL02R24S15 HL02R05D12 HL02R05D15 HL02R12D12 HL02R12D15 HL02R15D12 HL02R15D15 HL02R24D12 HL02R24D15 (VDC) 5 5 5 12 12 12 15 15 15 24 24 24 5 5 12 12 15 15 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 5 12 15 5 12 15 5 12 15 12 15 12 15 12 15 12 15 RATED OUTPUT CURRENT (mA) 400 166 134 400 166 134 400 166 134 400 166 134 83 67 83 67 83 67 83 67 INPUT CURRENT NO LOAD (mA) 70 70 70 40 40 40 30 30 30 15 15 15 70 70 40 40 30 30 15 15 RATED LOAD (mA)(%) 640 580 580 280 250 250 230 200 200 135 120 120 640 640 270 270 220 220 135 135 62 69 69 60 67 67 58 67 67 62 67 67 62 62 62 62 61 61 62 62 EFFICIENCY Note: Other input to output voltages may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.75 11.4 14.25 22.8 TYP 5 12 15 24 30 MAX 5.25 12.6 15.75 25.2 100 UNITS VDC VDC VDC VDC mAp-p Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise 5V Output - Singles Only Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign 60 Hz, 10 Seconds 500 500 1 25 2 2 0.5 0.02 25 10 250 0.5 0.1 110 12 VISO= 240VAC, 60Hz VDC Vpk G pF Arms W % %/C mVp-p mVrms mVp-p % % kHz g kHr kHr 5 100 350 1.0 0.5 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load Circuit Stress Method TA = +25C TA = +70C 1100 20 TEMPERATURE Specification Operation Storage -25 -40 -40 +70 +85 +110 C C C Page 2 HL02RrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.2850.010" (32.640.25) 1514 13 1.2850.010" (32.640.25) 2423 22 2423 22 1514 13 TOP VIEWS 0.5250.010" (13.340.25) 0.5250.010" (13.340.25) HL02RxxyzzY HL02RxxyzzZ 0.6950.015" (17.650.38) 123 10 11 12 123 10 11 12 0.3750.005" (9.520.13) 0.0150.005" (0.380.13) 0.0200.002" (0.510.05) SIDE VIEWS 0.3750.005" (9.520.13) 0.0150.005" (0.380.13) 0.1000.010" (2.540.25) 0.0200.002" (0.510.05) 0.1000.010" (2.540.25) END VIEWS 0-15 0.600" (15.24) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.0140.002" (0.360.05) .015.010" (.38.25) DIP PACKAGE NC = No Internal Connection. NU = Do Not Use. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. SMD PACKAGE PIN CONNECTIONS PIN# 1 2 3 10 11 12 13 14 15 22 23 24 SINGLES +VIN NU NU -VOUT +VOUT -VIN -VIN +VOUT -VOUT NU NU +VIN DUALS +VIN -VOUT Common Common +VOUT -VIN -VIN +VOUT Common Common -VOUT +VIN RECOMMENDED LAND PATTERN 0.100" (2.54) 2423 22 1514 13 RECOMMENDED REFLOW PROFILE 30 sec MAX (>220C) 250 235 C MAX 220 200 190 TEMPERATURE (C) 0.730" (18.54) 0.040" (1.02) 123 0.080" (2.03) 150 10 11 12 100 1.150" (29.21) 90 sec MAX (>190C) 50 TIME (seconds) HL02RrevD,10/97 Page 3 Page 4 HL02RrevD,10/97 |
Price & Availability of HL02R05S05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |